{"id":296,"date":"2025-08-15T06:05:24","date_gmt":"2025-08-15T06:05:24","guid":{"rendered":"https:\/\/4laborant.ru\/?p=296"},"modified":"2025-08-15T06:33:00","modified_gmt":"2025-08-15T06:33:00","slug":"lab-2-1-basic-configuration-router-cisco-2811-in-soho","status":"publish","type":"post","link":"https:\/\/4laborant.ru\/?p=296","title":{"rendered":"Lab 2.1. Basic configuration router Cisco 2811 in SOHO"},"content":{"rendered":"\n

R A N E T CO.,LTD.<\/strong>
LAB 1-2: IPv4 Addressing<\/strong><\/p>\n\n\n\n

You are the network administrator at Ranet, and have to config the router “Ranet-BR” via Console Terminal as below:
    1. enable interface Se0\/0\/0 and set IP address\/Subnet Mask that can connect with router “Ranter-HQ” at 192.168.0.254\/30
    2. enable interface Se0\/1\/0 and set IP address\/Subnet Mask that can connect with router “Ranter-BR1-1” at 192.168.0.30\/30
    3. The Headquater has given IP address range 192.168.0.0\/27 for the network behind our router, then you have to:
          3.1 enable interface Fa0\/0 and set IP address\/Subnet Mask to be the last IP of this subnet that has 10 host as members.
          3.2 enable interface Fa0\/1 and set IP address\/Subnet Mask to be the last IP of this subnet that has 5 host as members.
          3.3 Set IP address\/Subnet Mark of Host1 in each LAN to be the first IP of its own subnet, and set IP of gateway also<\/p>\n\n\n\n

If the configuration is correct, Host1 in each subnet must be able to ping to Ranet Server at 192.168.0.33<\/strong><\/p>\n\n\n\n